First, the correct choice of lifting machine
Choose the right lift: Choose the right lift model according to the work needs to ensure that it can meet your work needs.
Understand the load of the lift: ensure that the load range of the lift is not exceeded during use
Second, daily maintenance
Check the lift oil level: check whether the lift oil level is normal after work every day. If the oil level is too low, the oil should be replenished in time, and the fuel tank should be cleaned to keep the oil circuit smooth.
Check the parts of the lift machine: regularly check the parts of the lift machine, such as transmission wire rope, bearings, gears and other wearing parts, if any wear or damage should be replaced in time.
Clean the equipment: keep the surface of the lift machine clean, regularly clean the dust and debris on the equipment to prevent unnecessary wear and tear on the equipment.
Third, regular maintenance
Lubrication maintenance: Regularly lubricate and maintain all parts of the lift machine, especially the transmission system and lifting system. Use specified lubricating oil or grease for lubrication to ensure the normal operation of the equipment.
Check the electrical system: regularly check whether the electrical system of the lift is normal, such as wire wear, switch failure and other situations should be dealt with in time to avoid accidents.
Four, special maintenance
Anti-rust treatment: anti-rust treatment of the parts that are easy to rust, such as applying anti-rust agent. Check the equipment regularly to see if there is rust, if any, should be dealt with in time.
Replacement of wearing parts: according to the use, timely replacement of wearing parts, such as bearings, seals, etc. Replacement should pay attention to the selection of qualified parts.
Regular calibration: The lift is calibrated regularly to ensure the accuracy and reliability of the equipment measurement data. Calibration should be carried out in accordance with the relevant provisions, if there is an error should be adjusted in time.
Five, the matters needing attention
Strictly comply with the maintenance plan: maintenance of the lift machine in accordance with the prescribed maintenance plan, without omission or non-warranty.
Use qualified parts and oil products: In the maintenance process, use qualified parts and oil products, avoid using inferior or fake parts and oil products.
Follow safe operating procedures: During maintenance and use, follow safe operating procedures to ensure the safety of personnel and equipment.
Yantai Tengfei Industry and Trade reminds you that by following the above steps and precautions, you can effectively extend the service life of the lift and ensure that it remains efficient, stable and safe during use.
