News Center

How to use two post car lift correctly?

Two post car lift is an indispensable equipment in the automobile maintenance industry, and the correct operation and use method can not only improve the work efficiency, but also ensure the safety of operation. The following are the detailed operation steps and precautions for the use of two post car lift.
 
1. Preparation before operation
 
①. Check the device
 
- Check that all parts of the lift are in good condition, especially the hydraulic system, locking device and safety protection device.
 
- Ensure sufficient hydraulic oil and no leakage.
 
②. Vehicle inspection
 
- Ensure that the weight of the vehicle is within the lifting capacity.
 
- Check the chassis of the vehicle for obstacles to ensure that the lifting arm can support the vehicle correctly.
 
③. Check the environment
 
- Ensure that the operation site is smooth, solid and free of debris.
 
- Ensure that the operation area has sufficient space for easy operation and maintenance.

2. Operation steps
 
①. Vehicle parking
 
- Drive the vehicle slowly into the lift working area, ensuring that the center of the vehicle is aligned with the center of the lift.
 
②. Adjust the lifting arm
 
- Adjust the position of the lifting arm according to the vehicle chassis structure to ensure that the support point is correct.
 
- Ensure that the lifting arm is firmly in contact with the vehicle chassis and is not loose.
 
③. Lift the vehicle
 
- Press the lift button, slowly lift the vehicle, and observe whether the vehicle rises smoothly.
 
- After lifting to the required height, release the lifting button to ensure that the locking device is firmly locked.
 
④. Perform maintenance operations
 
- Perform maintenance operations while the vehicle is elevated to ensure safe operation.
 
- Use safety brackets or other auxiliary equipment to ensure vehicle stability.
 
⑤. Lower the vehicle
 
- After the repair work is completed, press the down button and slowly lower the vehicle.
 
- Ensure smooth descent of the vehicle without abnormal noise and vibration.
 
⑥. Remove the vehicle
 
- After the vehicle is lowered, slowly move away from the working area of the lift.
 
- Check whether all parts of the lift are reset and ensure that the equipment is in standby state.

3. use precautions
 
①. Safety first
 
- During the operation, always follow the safe operation procedures to ensure the safety of the operator.
 
- Use appropriate tools and equipment to avoid accidents caused by improper operation.
 
②. Get regular checkups
 
- Regular inspection of the various components of the lift, especially the hydraulic system, locking device and safety protection device.
 
- Replace worn or damaged parts in a timely manner to avoid safety accidents caused by equipment failures.
 
③. Professional training
 
- Operators should receive professional training and be familiar with the operation process and safety precautions of the lift.
 
- Conduct regular safety drills to improve the emergency handling ability of operators.
 
④. Load limitation
 
- Ensure that the weight of the vehicle is within the carrying range of the lift to avoid overload operation.
 
- During lifting, maintain smooth operation and avoid sudden acceleration or deceleration.
 
⑤. Environmental requirements
 
- Ensure that the operation site is smooth, solid and free of debris.
 
- Ensure that the operation area has sufficient space for easy operation and maintenance.
The correct operation and use method of two post car lift is the key to ensure the safe operation and efficient use of the equipment. By following the procedure and precautions, you can effectively avoid potential safety hazards and improve work efficiency. Safety is always the first priority, both for the operator and for the equipment itself. Regular maintenance and inspection, professional training and strict compliance with the operating code are important guarantees to ensure the safe operation of two post car lift.